P12 - Flat Connection Abutments (Suitable for the "All on Four" Solution) – The Complete Fit!
In the past, screw-retained dentures for multiple implants required implants to be placed parallel to one another. Abutments that need to be secured to deep hexagonal platforms cannot be placed on a series of divergent, or non-parallel, implants.
A.B. Dental Devices boasts a new generation of implants and abutments which will maximize surgical options without concern for the possible limitations of the future rehabilitation stage. If the restoration dentist decides to carry out the rehabilitation by regular deep platform abutments, he can do so. If the restoration dentist can't use the regular deep platform abutments because the implants are non-parallel, a Complete Fit can be achieved by securing the Flat Connection Abutments directly to the implants.
"Perfect Fit" – the "Third Generation" Abutment
* Issued Patent by A.B. Dental Devices, Ltd.
Achieving the "Perfect Fit" between implant and abutment.
A.B. Dental Devices continues to strive for excellence, and is now revealing a patented "Third Generation" abutment.
The "Perfect Fit" technology is an innovation for hexagonal prosthetic accessories. This technology provides an even more aesthetic solution than is currently available on the market.
The hexagon is sliced longitudinally by tiny radial spaces in its sides. This slicing provides the abutment with an elasticity which allows a greater area of contact between the abutment's hexagon and the implant's hexagon.
The material used – Titanium - provides the abutment with an additional elasticity achieving the Perfect Fit between implant and abutment.
One of Newton's Laws of Physics states that the passing of forces between two objects is possible only once absolute contact between the 2 objects is achieved.
Our International and worldwide Patented Perfect Fit allows the strong chewing forces to affect only the implant and not the abutment (which is usually the case).
The implant is built to sustain these kinds of strong forces ( 80 cm2 ) as opposed to the screw that cannot sustain this amount of force.
The primary advantages:
* Complete prevention of loosening and crooked screws
* Strict precision within 5 microns for both the implant hexagon and the hexagonal neck of the abutment
This solution offers a high rate of long term success!
P3S - Anatomic Anti-rotation Abutment
The Anatomic Anti-rotation Abutment is available in different heights.
The lower part is located in the buccal part which offers an aesthetic solution.
The Anatomic Angular Abutment follows the shape of the gum line and there is no need to grind the abutment in the patient's mouth.
P4 - Angular Abutment
The lower part of the Angular Abutment is located in the buccal part which offers an aesthetic solution.
P4S – Anatomic Angular Abutment
The Anatomic Angular Abutment is available in two heights – 1 mm and 3 mm.
The lower part is located in the buccal part which offers an aesthetic solution.
The Anatomic Angular Abutment follows the shape of the gum line and there is no need to grind the abutment in the patient's mouth.
P4/3 – Multi-optional Angular Abutment in 3 pieces
This abutment is designed for the maximum restoration options. It is possible to select 24 different orientation possibilities, available every 15º. Most angular abutments only allow for 6 restoration orientations. There is no need to grind the abutment in the patient's mouth.
In addition to it being user-friendly, the Multi-optional Angular Abutment in 3 pieces is suitable for immediate loading.
P5-20º – Multi–Optional Angular Abutment
* Issued Patent by A.B. Dental Devices, Ltd.
This unique abutment offers a solution for non-parallel implants.
Its advantages are:
- Excellent solution for non- parallel implants, for accurate joints on overdenture implants.
- Enables adjustment of the angle at which the implant is positioned
- This new design provides multiple solutions for difficulties in affixing and removing overdentures, side pressures from other teeth / implants, prevents wear of ball attachment.
P14-17º and P14-30º – Angular Adaptors for the "All on Four" Solution
* Issued Patent by A.B. Dental Devices, Ltd.
The 17° and 30º angular adaptors offer new rehabilitation solutions to implants inserted at extreme angles,
especially in front teeth. These abutments are intended for use in the "All on Four" method of screwing a bridge onto implants where one or more of the implants are angled outwards. This awkward angling creates an aesthetic problem where the screw will be visible in the buccal part. In our "All on Four" solution, the screw of the angular abutment is covered and the connection to the bridge comes from the direction of the tooth.
P15 - Temporary Abutment for Immediate Loading
This abutment is intended for immediate loading on temporary bridges. The abutment and its plastic cap are connected by a "click" to the bridge. There is no need to correct the angle of the implant and no need to use cement during temporary reconstruction.
This abutment is reusable following a cleaning process similar to that of the Healing Cap.
D3 – Clip Transfer
One piece Clip Transfer where no affixing screw is required.
This simplified method of impression taking is used in back teeth where the lack of space does not allow both the screw and the driver to fit in.
In addition to it being user-friendly, the carrier can be used like a driver even in dense bone.
This method allows planning in advance for the future rehabilitation and restoration of the implantation site. The positioning of the Clip Carrier's upper hex enables the dentist to anticipate the exact location of future restoration components since the lower hex operates in conjunction with the upper hex.
Unique Drivers
A stronger grip on screws and healing caps prevents the driver from slipping into the patient's mouth. Our drivers are manufactured using the best available material and undergo strict thermal treatment assuring long term durability.
Conical Drills
This Third Generation of Conical Drills provides drilling solutions for all of the conical implants. The Research and Development team has created a unique family of three conical drills which offers a simple, practical and efficient solution.
- The TDC-2.2 is suitable only for our I6 Implants due to its small diameter.
- The TDC- 3.2 is suitable for Conical Implants with diameters of 3.75mm, 4.2 mm, 4.5 mm and 5 mm. It offers a vast range of drilling solutions which will minimize both the frequent change of drill bits and costs.
- The TDC- 4.0 is suitable only for our I5 and I7 Implants with a diameter of 6mm.
T8c-10-40 – Ratchet Torque Combo
This torque can be adjusted to the requested force of 10-40 Ncm and in addition be used as a regular ratchet.
A.B. Dental Devices - where quality is our guiding standard, and commitment to the needs of our clientele is unshakeable.
Our customers enjoy the highest technical quality available, a variety of models and implant types and sizes.
We are pleased to offer uncompromising excellence, our undivided attention and personal service. Our staff is committed to making continuous improvements in the quality of implant technology in order to provide you with the best possible solutions for dental and oral restoration.
